Networking Training in Sintra

This instructor-led, live training in Sintra (online or onsite) is aimed at intermediate-level IT professionals who wish to learn the essential knowledge and practical skills required to deploy, manage, and troubleshoot Cisco Catalyst 9000 Series Switches within modern network environments.

By the end of this training, participants will be able to:

• Understand the architecture, capabilities, and positioning of the Cisco Catalyst 9000 Series switches.
• Use CLI, Cisco DNA Center, and IOS-XE web user GUI for management.
• Utilize security features, cloud integration, and automation tools.
• Deploy the switches within various network environments.
• Leverage Cisco DNA Center for device provisioning, management, and automation.

Network Synchronization — OSA 5421 and FSP Network Manager (FSP NM) offers a targeted introduction to both the OSA 5421 platform and the FSP NM management system, detailing their roles in delivering accurate synchronization across packet and circuit-based networks.

This instructor-led, live training session (available online or onsite) is designed for intermediate-level network and synchronization engineers who wish to deploy, configure, monitor, and troubleshoot synchronization solutions based on OSA 5421 and FSP NM.

Upon completion of this training, participants will be able to:

• Explain synchronization principles and the role of OSA 5421 and FSP NM in mobile and transport networks.
• Describe the hardware and software architecture of OSA 5421.
• Configure primary interfaces and timing sources including SyncE and PTP.
• Apply monitoring and KPI techniques within FSP NM to maintain synchronization performance.
• Troubleshoot common synchronization faults and design resilient timing architectures.

Format of the Course

• Interactive lecture and discussion.
• Hands-on configuration and lab exercises.
• Real-world case studies and troubleshooting scenarios.

Course Customization Options

• To request a customized training for this course, please contact us to arrange.

An IP RAN Router functions as a critical networking device and logical component responsible for aggregating, routing, and managing IP traffic between radio access network elements and core network functions.

This instructor-led live training, available either online or on-site, is designed for intermediate network engineers and RAN specialists aiming to deploy, configure, and troubleshoot IP RAN routing solutions.

After completing this training, participants will be capable of:

• Describing the function and architecture of IP RAN routers within mobile networks.
• Configuring core interfaces and establishing basic routing for RAN connectivity.
• Implementing routing protocols essential for RAN environments, such as OSPF and BGP.
• Applying QoS and traffic engineering principles to prioritize RAN traffic.
• Troubleshooting common deployment and operational challenges.

Course Format

• Interactive lectures and discussions.
• Hands-on configuration exercises and laboratory sessions.
• Real-world case studies and troubleshooting scenarios.

Customization Options

• For tailored training arrangements, please contact us.

GNS3 is a versatile network simulation tool that facilitates integration with automation frameworks, containerized services, and cloud environments to create advanced lab configurations.

This instructor-led live training, available online or onsite, targets advanced networking professionals seeking to automate, containerize, and scale their GNS3 labs using real-world architectures that involve hybrid and multi-cloud platforms.

Upon completion of this training, participants will be able to:

• Automate network tasks by leveraging Python scripts and Ansible within GNS3 environments.
• Deploy Docker containers inside GNS3 to emulate network services and endpoints.
• Integrate GNS3 with cloud platforms such as AWS and Azure to establish hybrid lab environments.
• Design scalable topologies for multi-vendor testing and continuous integration.

Course Format

• Interactive lectures and discussions.
• Hands-on lab configuration using live GNS3 topologies.
• Integration exercises involving automation and container orchestration tools.

Course Customization Options

• To request customized training for this course, please contact us to make arrangements.

GNS3 is a robust network simulation platform that empowers professionals to construct, test, and validate complex network designs within a virtualised environment.

This instructor-led, live training (available online or onsite) is tailored for intermediate to advanced IT professionals aiming to utilise GNS3 for network planning, testing, and replicating production environments.

Upon completion of this training, participants will be able to:

• Design and simulate enterprise-grade network architectures using GNS3.
• Replicate production environments to facilitate safe testing and change validation.
• Integrate real operating systems and services into GNS3 topologies.
• Utilise GNS3 for troubleshooting, documentation, and client demonstrations.

Course Format

• Interactive lectures and discussions.
• Realistic network simulations and hands-on labs.
• Project-based exercises focused on design and testing use cases.

Course Customisation Options

• To request customised training for this course, please contact us to arrange.

This instructor-led, live training in Sintra (online or onsite) is aimed at intermediate-level networking professionals who wish to prepare for Cisco CCNA or CCNP certifications using GNS3 to simulate Cisco devices and build exam-aligned topologies.

By the end of this training, participants will be able to:

• Install and configure GNS3 for Cisco certification lab environments.
• Import and manage Cisco IOS images for routers and switches.
• Build and test topologies aligned with CCNA and CCNP exam objectives.
• Practice real-world routing, switching, and troubleshooting scenarios.

This instructor-led live training in Sintra (online or onsite) is designed for intermediate-level SDN developers and software engineers who aim to learn how to build custom SDN applications using OpenDaylight APIs and YANG models to improve network functionality and scalability.

By the conclusion of this training, participants will be able to:

• Comprehend the architecture and components of OpenDaylight.
• Leverage OpenDaylight APIs to develop SDN applications.
• Create and manage YANG models for network customization.
• Deploy, test, and debug custom applications in an OpenDaylight environment.
• Integrate OpenDaylight with external systems and network devices.

Fiber optics is a high-speed communication technology that transmits data using light signals through thin strands of glass or plastic fibers.

This instructor-led, live training (online or onsite) is aimed at intermediate-level IT professionals and technicians who wish to understand fiber optic systems, perform measurements, and apply best practices for installation and maintenance.

By the end of this training, participants will be able to:

• Understand the principles and advantages of fiber optic communication.
• Identify different types of fiber cables, connectors, and splicing methods.
• Use key optical measurement instruments such as OTDR and fusion splicers.
• Perform basic troubleshooting, testing, and documentation of optical networks.

Format of the Course

• Interactive lecture and discussion.
• Practical demonstrations and instrument handling.
• Hands-on exercises in a live-lab environment.

Course Customization Options

• To request a customized training for this course, please contact us to arrange.

This instructor-led, live training in Sintra (online or onsite) is aimed at beginner-level networking professionals who wish to learn how to use GNS3 to simulate basic networks and gain hands-on lab experience for certification and practical knowledge.

By the end of this training, participants will be able to:

• Install and configure GNS3 on their local system.
• Understand and use the GNS3 graphical interface and topology builder.
• Create and test basic network topologies with routers, switches, and PCs.
• Integrate GNS3 with tools like Wireshark for packet analysis.

This instructor-led, live training in Sintra (online or onsite) is aimed at intermediate-level SDN developers and network engineers who wish to develop custom applications on the ONOS platform to address specific network challenges and enhance SDN capabilities.

By the end of this training, participants will be able to:

• Understand the architecture and core components of ONOS.
• Set up a development environment for ONOS applications.
• Create, test, and deploy ONOS applications for managing SDN networks.
• Integrate ONOS applications with external systems and APIs.
• Troubleshoot and optimize ONOS applications for performance and scalability.

This instructor-led, live training in Sintra (online or onsite) targets intermediate-level network engineers seeking to acquire the competencies required to design, install, and maintain fibre optic networks.

Upon completion of this training, participants will be capable of:

• Grasping the core principles of fibre optic technology.
• Applying network design methodologies for point-to-point and FTTH networks.
• Installing and maintaining fibre optic cables and connectors.
• Testing and troubleshooting fibre optic networks.

This instructor-led, live training in Sintra (online or onsite) targets intermediate-level network engineers and DevOps teams aiming to deploy, configure, and manage SDN solutions using the OpenDaylight platform.

By the end of this training, participants will be able to:

• Understand OpenDaylight's architecture, components, and role in SDN ecosystems.
• Install and configure OpenDaylight for various network scenarios.
• Develop and deploy network flows using OpenDaylight controllers.
• Integrate OpenDaylight with SDN-enabled devices and existing networks.
• Troubleshoot and optimize OpenDaylight deployments for real-world use cases.

This instructor-led, live training in Sintra (online or onsite) is aimed at intermediate-level to advanced-level database administrators, network engineers, and IT professionals who wish to optimize database performance, scalability, and reliability using Spine-Leaf architecture with VXLAN.

By the end of this training, participants will be able to:

• Grasp the Spine-Leaf network topology and its advantages.
• Deploy VXLAN for scalable and efficient database networking.
• Optimize database workloads across distributed data centre environments.
• Implement Spine-Leaf architecture in both cloud and on-premises data centres.
• Strengthen network security, redundancy, and fault tolerance for database environments.
• Automate network configurations for database management using Python and Ansible.

This instructor-led, live training in Sintra (online or onsite) is aimed at intermediate-level to advanced-level networking professionals who wish to expand their expertise in advanced networking practices using Linux.

By the end of this training, participants will be able to:

• Implement advanced networking protocols and configurations under Linux.
• Configure and manage Virtual Private Networks (VPNs).
• Set up and secure firewalls for a robust network security setup.
• Monitor and troubleshoot network performance issues.

This instructor-led, live training in Sintra (online or onsite) is aimed at intermediate-level network engineers who wish to use, maintain, and troubleshoot microwave networks effectively.

By the end of this training, participants will be able to:

• Understand the principles and operation of microwave communication systems.
• Design and implement point-to-point and point-to-multipoint microwave links.
• Perform link budget analysis and network planning.
• Operate, maintain, and troubleshoot microwave networks effectively.

This instructor-led, live training in Sintra (online or onsite) is designed for beginner-level network engineers and IT administrators who wish to master fundamental OpenDaylight concepts, grasp its role in network automation, and start automating network configurations and operations.

Upon completion of this training, participants will be able to:

• Understand the role of OpenDaylight in software-defined networking (SDN).
• Install and configure OpenDaylight on a Linux-based system.
• Explore the OpenDaylight architecture and core features.
• Create basic automated network configurations using OpenDaylight.
• Monitor and manage networks using OpenDaylight controllers.

OpenUEM is an open-source unified endpoint management platform that allows organizations to efficiently deploy, configure, and maintain their endpoint devices.

This instructor-led live training (available online or onsite) is designed for beginner-level IT professionals seeking to acquire foundational skills in endpoint management using OpenUEM, including installation, configuration, and fundamental device management tasks.

Upon completion of this training, participants will be capable of:

• Installing and configuring the OpenUEM server and agents across various endpoint platforms.
• Enrolling, organizing, and managing endpoints effectively within the OpenUEM console.
• Deploying software, patches, and updates to managed devices.
• Monitoring device health, generating reports, and performing basic troubleshooting tasks.

Course Format

• Interactive lectures and discussions.
• Hands-on exercises and practical scenarios.
• Implementation in a lab environment featuring real endpoints.

Customization Options for the Course

• To request tailored training for this course, please contact us to arrange it.

This course offers comprehensive training on OpenStack. It begins with an introduction to the system, progresses through hands-on workshops that provide practical knowledge for managing private clouds based on OpenStack, and concludes with troubleshooting and advanced architectural topics. The primary goal is to familiarise participants with the OpenStack ecosystem while establishing a strong foundation for future expansion and refinement of OpenStack clouds. The curriculum covers all necessary topics to achieve the OpenStack Administrator certification. Notably, 75% of the course is dedicated to hands-on workshops within a real OpenStack training environment.

In this instructor-led, live training in Sintra, participants will explore the critical features of DNS while undertaking exercises to set up and configure a BIND DNS server on Linux. The session starts by reviewing core networking concepts, followed by practical application in setup and configuration. The discussion and hands-on work then advance towards more intricate topics such as security, availability, debugging, and troubleshooting.

This instructor-led, live training in Sintra (online or onsite) is aimed at beginner-level to intermediate-level technicians and engineers who wish to use GPON and next-generation PON technology to deploy, operate, and maintain passive optical network infrastructure.

By the end of this training, participants will be able to: understand GPON and XGS-PON architecture and component roles, design and plan basic fiber access deployments using modern standards, perform hands-on installation and vendor-neutral configuration of OLT and ONT devices, monitor optical levels and alarms, troubleshoot common optical and service issues in the field, and identify the evolution path to 25G and 50G PON networks.

A two-day theoretical course featuring practical demonstrations that explores the core principles of Internet Protocol version 6. Topics include addressing schemes, protocol structures, ICMP v6, discovery mechanisms, and IPv6 routing.

Audience:

Network planners, designers, and engineers who need to grasp IPv6 concepts. This course is ideal for those seeking a thorough overview of IPv6 and the migration journey from an IPv4 infrastructure.

This instructor-led, live training in Sintra (online or onsite) targets beginner-to-advanced level IT professionals who aim to utilize Linux networking tools to build, configure, and support a custom router featuring WAN, LAN bridging, NAT, and DHCP services.

By the end of this training, participants will be able to configure network interfaces, enable routing and NAT, deploy DHCP services, and troubleshoot router connectivity issues.

This instructor-led live training in Sintra (online or onsite) is aimed at network engineers who wish to maintain, manage, and design computer networks with Python.

By the end of this training, participants will be able to:

• Optimize and utilize Paramiko, Netmiko, Napalm, Telnet, and pyntc for network automation with Python.
• Master multi-threading and multiprocessing techniques in network automation.
• Apply GNS3 and Python for network programming.

This instructor-led, live training in Sintra (online or onsite) is designed for intermediate-level network and infrastructure professionals who wish to utilise open-source routing, switching, Wi-Fi, and management tools to design, deploy, and operate a self-managed enterprise network.

By the end of this training, participants will be able to: design an open-source enterprise network architecture, configure routing, switching, and wireless services, enhance security and observability, and develop an operational plan for ongoing support.

This instructor-led, live training (online or onsite) is tailored for beginner to intermediate telecom engineers and field professionals who wish to employ structured deployment methodologies and industry best practices to successfully install, supervise, integrate, and manage multi-vendor wireless networks from 2G to 5G across operator and enterprise environments.

By the end of this training, participants will be able to:

• Install and configure multi-vendor BTS systems (Huawei, ZTE, Ericsson) from 2G to 5G.
• Supervise site deployment activities and coordinate RF, transmission, power, civil, and core network teams during integration.
• Prepare telecom sites for ATP (Acceptance Test Procedure) and manage operator handover processes.
• Monitor wireless KPIs and manage cluster-based and region-based network operations within commercial and technical reporting structures.

This instructor-led live training in Sintra (online or onsite) is designed for beginner to intermediate IT professionals who wish to understand the basics and principles of modern information and communication technologies and their applications.

Upon completion of this training, participants will be able to:

• Explain the main components and functions of internet architecture and how they interact.
• Describe the features and benefits of modern network solutions and implementations, such as fiber technology, clustering, and the Internet of Things (IoT).
• Understand the concepts and models of cloud computing and its services, such as Infrastructure as a Service (IaaS) and virtualization.
• Identify future trends and directions in ICT and their implications.

Uptime Kuma is a user-friendly, self-hosted monitoring tool designed to track the availability of websites, services, and infrastructure. It offers an alternative to Pingdom, Datadog Synthetics, and UptimeRobot for teams that require monitoring data under their own control. This instructor-led live training (available online or onsite) targets beginner-to-intermediate SREs and DevOps engineers who wish to transition from cloud uptime monitoring to a self-hosted, sovereign status tracking platform using Uptime Kuma.

This instructor-led live training in Sintra (online or onsite) is targeted at security engineers and system administrators seeking to deploy and manage enterprise-grade self-hosted VPN solutions using WireGuard and OpenVPN.

By the end of this training, participants will be able to deploy WireGuard and OpenVPN, design scalable architectures, integrate with identity systems, and monitor and secure the VPN infrastructure.

OpenVPN and WireGuard are the two dominant open-source VPN protocols. Running your own VPN server ensures that no third-party provider can log traffic metadata, inject advertisements, or comply with foreign data requests. This training covers both protocols for different threat models and performance requirements.